Order Instructions

How to Apply Your IDYOURCLEATS 

Personalize your football boots in just a few simple steps.

No glue. No special equipment. No complicated process.

Designed for footballers, IDYOURCLEATS transfers provide a clean, professional finish that stays secure through training, matches, and celebrations.


Prepare Your Boots

Clean Before Applying

A clean surface is essential for maximum adhesion.

  • Wipe away mud, dust, and dirt using a damp cloth.

  • Use the included priming wipe to remove oils and any remaining residue.

  • Let the boots dry completely for at least 15–20 minutes, or dry them with a clean microfiber cloth.


Ideal Application Surfaces

For the best results, apply your transfer to:

  • Smooth leather boots

  • Synthetic leather boots

  • Flat, dry, and clean areas of the boot

Surfaces to Avoid

Do not apply your transfer on:

  • Deep creases or textured panels

  • Fabric, mesh, or knitted materials

  • Wet or dirty surfaces


Applying Your Transfer

Before You Apply

  • Choose the exact position before removing the backing.

  • Make sure your work area is clean and well lit.

  • Keep a soft cloth nearby in case you need to smooth the transfer.

Secure the Transfer

  1. Place the transfer carefully in your chosen position.

  2. Press firmly with your thumb for 10–15 seconds.

  3. Apply consistent pressure across the entire design, especially around the edges.


Peel Away the Carrier Film

  • Allow the transfer to rest for about 60 seconds.

  • Slowly lift the clear carrier film from one corner.

  • The design should remain firmly attached to your boot.

If any section begins to lift:

  • Press it back down firmly.

  • Wait a few more seconds.

  • Peel again slowly.


After Application

Bonding Time

  • Instant Hold: Your boots are ready to handle immediately.

  • Full Strength: Maximum adhesion develops within 1–2 hours.

  • Ready for Play: You can use your boots straight away, but waiting at least 2 hours is recommended for the strongest bond.

Best Practice: Apply your IDYOURCLEATS transfer the night before your next game for optimal performance.


Looking After Your Transfer

Your IDYOURCLEATS design is made to last with simple care.

Cleaning

  • Wipe clean using a damp cloth.

  • Standard football boot cleaners are safe to use.

  • Clean gently to maintain the finish.

Avoid

  • Washing machines.

  • Soaking your boots in water.

  • Harsh brushes or abrasive scrubbing over the transfer.


Tips for Long-Lasting Performance

To keep your transfer looking its best:

  • Avoid lifting or peeling the edges after application.

  • Once the edges are disturbed, the adhesive bond may weaken.

  • Clean around the transfer gently instead of scrubbing directly over it.

Follow these simple steps and your IDYOURCLEATS transfer will remain securely in place, keeping your boots looking sharp from kickoff to the final whistle.